DaisyNET from COMM-TEC is a wired distribution system for uncompressed high resolution AV signals on a dedicated bus.
 
It handles HDMI 1.4, DisplayPort and VGA + Audio input signals, converts them to HDMI if needed and sends them using CAT-5e/6 (AWG 23) cables over distances up to 100m.

At the same time Ethernet data up to 100 Mbps is distributed over the same cable.

The ingenuity of the system is that it works in a daisy chain topology. You can add as many units as you need.
Connection is done by using inexpensive easy to install CAT-5E/6 (AWG 23)cables. Pushing a local “ShowMe” button on any transmitter feeds its signal on the HDBaseT bus.
At the end of the bus we use a receiver device. It has an HDMI 1.4 output with HDCP and gives out the AV signal that is on the bus.
It is also possible to daisy chain the receivers, they all will show the same signal.

DaisyNET also offers RS232 ports. They are used for firmware update and for control purpose.
Firmware update is done per unit, control is done on the very first unit, controlling all others.

As soon as you connect one unit to a network, the whole system acts like a network switch and offer 100 Mbps at each unit.
It is obvious, that units share the bandwidth.

No matter if you use DaisyNET as a desktop application or hide it and just use the connectivity: DaisyNET can be utilized in a huge variety of vertical market applications.

Features

• Transmitters can be daisy chained        • Receivers can be daisy chained • Auto-adjustment for cable length • No manual configuration needed • Plug ‘n play • Control over RS232 possible • HDMI 1.4 IN at Tx • DisplayPort IN at Tx • VGA & Audio IN at Tx • Ethernet port at Tx and Rx

• RS-232 port at Tx and Rx • Daisy chain IN and OUT • Daisy chain by CAT-5E/6 cable • Local ShowMe button per Tx • Remote ShowMe button • Full HD support: Up to 1080p • Uncompressed signal transport • LED indicator for selected input • LED indicator daisy chain signal

More information you can find here

Typical application:

UP-1080p : The 12 to 2 Switcher and Scaler for the Conference room

The UP-1080p is an Presentationsswitcher with Scaler.
12 Input signals with 5 different signal types can be switched to the 2 parallel outputs.
All input signals will be scaled to the user defines output resolution.
The Composite, S-Video, Component and VGA Input have an balanced stereo audio input, at the HDMI inputs is the audio embedded.
An additional and controllable microphone input is available.
Video and Audio can be switched as Audio-follows-Video or Break-Away.
The switcher can be controled by front panel, IR Remote, On-Screen-Menu or by RS-232.

Features:

Video inputs: - 2 x Composite - 2 x S-Video - 2 x Component - 2 x VGA - 4 x HDMI (HDCP conform) Audio inputs: - 8 x balanced stereo Audio - 4 x Audio via HDMI - 1 x Microphone (6,3 mm jack) Video output: - 1 x HDMI - 1 x VGA - parallel output by HDMI and VGA       Audio output: - Digital via HDMI, switchable - Analog (Stereo RCA)

Output resolutions: 4:3: 800×600, 1024×768, 1280×1024, 1400x1050, 1600×1200 16:9 / 16:10: 1280×720, 1280×800, 1366×768, 1440×900, 1600×900, 1680×1050, 1920×1080 Control: - Front panel - IR Remote - On-Screen-Menu - RS-232 Other: - HDCP conform - Volume control of the microphone - Master volume - Switch as Audio-follows-Video or Break-Away

  COMM-TEC offers products around the classic Signal Management.
  These are

•   Distribution Amplifiers
•   Switcher
•   Matrix Switcher

Tabletop Interconnect Boxes

The ProCONNECT Tabletop Interconnect Boxes are made for installation in tables or furniture surfaces. With a light press on the cover, the connection plate will tilt up and show its connections. The tilting mechanism is supported by a gas-powered spring. If the connections are not needed, the box can be pushed back into the table or furniture leaving a truly even and flush surface. The 500 series has a partly fixed configuration but also includes free slots which can be equipped with additional modules.

• Easy-to-access connection panels for conference room tables
• Connections available for all prevalent signal types
• Push buttons and volume control knobs for controlling AV equipment
• All signals pass through under the table
• Modular build allows for customized solutions
• Push-to-flip mechanism saves space on the table
• Power sockets available for the most popular European standards
• No sharp edges

You will find detailed information about ProCONNECT here

Here you can find Twisted Pair extender (Balun) for
Composite, Component and Audio signals

Point-to-Multipoint as Table Top

Point-to-Point as Table Top

Point-to-Point as Flash Mount

   Cables, assembled or as bulk,
   as well as BTX, solderfree connectors,
   can you find at COMM-TEC Cable